Tuesday, April 30, 2019

How to Build Pull Out Under Sink Storage Trays for Your Kitchen

Construct roll-out trays for extra storage space in the sink base cabinet.




Introduction

Build these handy undersink roll-out trays in a weekend. You can tackle this project with simple carpentry tools and some careful measuring. You can make all the trays in an afternoon using building products from your local home center or hardware store for as little as $80.
Family Handyman



Tools Required

  1. Air compressor
  2. Air hoseBrad nail gun
  3. Circular saw
  4. Clamps
  5. Combination square
  6. Cordless drill
  7. Countersink drill bit
  8. Framing square
  9. Paintbrush
  10. Safety glasses
  11. Tape measure





Materials Required

  1. 1-5/8" wood screws
  2. 1/2" x 2' x 2' hardwood plywood
  3. 1x4 x 16' maple
  4. 1x6 x 2' maple
  5. 20" ball-bearing drawer glides
  6. 3/4" x 4' x 8' hardwood plywood
  7. 6d finish nails
  8. Construction adhesive
  9. Woodworker's glue

Getting the right stuff

Have you finally had it with that dark and dingy, I'm-not-sure-what's-there storage space under the kitchen sink? Well, these two types of roll-out trays, which ride on smooth-action ball-bearing drawer glides, will get everything out in the open and let you find exactly what you need at a glance.


 

>> continue reading  How to Build Pull Out Under Sink Storage Trays for Your Kitchen